شرح كامل البوكس الفي برو تحدي

،ùPresentation Software-Sketch:
،ùSoftware-driven installation£؛
1) software for the COM interface and USB interface connected, the first connecting with the computer, the computer will find new hardware (that is, software instrument), as follow:

2) whether the choice of a moratorium on the next step after the Figure:
3) Choose from the list or designated installed, and then the next step, Figure:
4) Click Browse, select the software directory software-driven, Figure:
5) a good choice if the driver identified, and then continue to the next step, Figure£؛
6) Click continued to begin installation of the software-driven, Figure:
7)a driver installation is complete, the figure:
8) Click completed will, once again, pop-up wizard to install new hardware drivers, according to the above steps can be installed!
9) driver installation is complete, right-click the "My Computer" ،ْ "attribute" ،ْ "hardware" ،ْ "Device Manager" ،ْ "port" in the use of equipment can view the port (SphereGSM Fighter Cable Com3 ) Figure:


،ùIntroduction and use of software functionality£؛
First of all equipment will be connected with the computer, and waiting for equipment from light orange red after running into control software (CPU equipment start-up time of about 15 seconds or so, and other equipment must be finished before the start operating main platform), as we will be software demolition plans 8 are divided into the following parts Commentary:

1) of the state apparatus:
The first column shows that the connection status of equipment;
Column 2 of display equipment serial number;
Column 3 version of the software, display equipment;
In the fourth column display equipment hardware version;
The fifth column display equipment usage records;
In the sixth column display equipment wiring definition currently in use.
2) software support models show that column: You can manually choose to operate inside the aircraft, in models that can be input directly to the operation of mobile phone models quickly find.
? 3) cell phone software platform of choice column: Figure in the MT1009, MT1013, are upgraded versions of the platform, users can choose to use different platforms with different instructions for operators to choose the order for the platform, and then click operation button implementation options platform.
4) show that the software platform statement: equipment for the initial state and the main function on instructions Along with the replacement of software platform change, choose a different software platform to show that the use of the software platform.
5) Web: Click on the Company can be directly landing site.
6) re-connect equipment: When machines and computers lost click on the link buttons to quickly connect equipment,
After a functional or operational equipment may also need to reset button directly through this re-connect equipment in the normal use of offline suddenly, this button can also be re-connected without re-activated control software.
7) a tool: the end of interpolation including scanning phone definition and port switch tools, this tool for detailed below:
Click on the settings in the software control button, the pop-up box operation Figure:

COM I brush machine: switching equipment for the Brush-channel COM1 I brush machine, the general software platform will support multi-port operation, only
Some platforms do not support multi-port or lock can only choose COM1 when I needed when I brush-COM! I brush-COM switch
, If the need to control apparatus, in accordance with the above operations can be!
Send: Send the currently selected data line definition. Automatic transmission equipment itself is the definition of when you choose a model operation, the equipment
The models will be automatically sent to the definition, but here can also be used to send manual definition, when you encounter a software we do not contain the models,
And you have this software and its platform, and you know what the definition of the data, then we can select the data you need
Line, and then click send, display equipment has been sent to open your own future operating software can be! (Note: Send definition of success,
Not operating software on the other models, due to equipment models and data bundled line definition, if the operation of the other models, apparatus, it will send
The definition of the models would lead to the definition of previously manual sent invalid. )
Clearance: removal of the current pin-definition display, if that is then sent to an empty definition sent to the apparatus.
Upgrade: mainframe software version upgrade, and repair of computer equipment or apparatus can not connect
Indicator can not go orange problems.
(As host "pink host" upgrade Note:
First inserted good serial line.
Host catch behind cling to reset button
Insert the USB cable
Open interface upgrade, upgrade to choose the correct documents.
Wait until the upgrade appeared on the progress of the interface when the reset button open. )
A. upgrade button click, pop-up file selection dialog upgrade Figure:

B. apparatus connected normal, will be prompted to initialize successfully Figure:

C. apparatus after the completion of initialization, for the start of equipment upgrades, and will be accompanied by the progress of that figure:

D. progress of the end, the upgrade is completed, the pop-up dialog box, click OK, turn off the window, and then click heavy equipment can be connected! Figure:

Scanning: Scan phone tail inserted interface definitions (Prerequisite: mobile phones must be able to boot, is not part of the boot can also scan to scan has been on
Live boot key link, until the completion of the scanning).
(Note: 3.0 new version of the mainframe, when the definition of scanning time, or the wrong way is to stop the time, according to a certain console behind the reset switch and then switch off the control platform required)
Scanning a good preparation before the open set-up tool to remove some current definition, and then click Send, equipment located at the foot blank state, with the equipment through the phone line connecting data well (must use the scanning equipment supply line Power to the mobile phone, or scanning can not succeed), electricity lines will be scanning the red folder phone trap cathode, anode black folder, and then hold down the phone on key link (At this point the phone boot or shut down repeatedly on the boot, not boot not the phone), click scanning, pop-up scanning the selection box Figure:

B CPU type in the correct choice of mobile CPU type (here with a hand TI chipsetFor example), scanning PIN are based phone tail
PIN number may be, and then click the start button to begin scanning mobile phones, the first mobile scanning the ground Figure:

C scanning earth after the success of the pop-up dialog box asking whether or not to continue scanning, click "yes" to continue to scan, in order to withdraw from the click "No",
We, by "yes" to begin scanning Figure:
D scan until after the success of the following pop-up boxes, click OK, and Figure:
E scan is complete scanning of course, to preserve the definition of the data lines where the name choice of data used by the mobile phone PIN number first, and then the connection
The input of the data line models, for example: CECT_T520_TI, and then click preserved, suggesting that increased confirm whether the new definition,
Figure:
F click, pop-up Advanced Settings box Figure
G name of the project where the importation of mobile phone models, and then click the increase in bundled phone brands where their choice of brands, and then select
To use the platform to select multiple or single Figure

H and then click OK asks if confirmed to increase the models, click increasing completed Figure:

I scan the entire process is completed, now dominate the top to look at, we have new models, open CECT models can be seen List
We have increased the model, the platform is the top choice of platform, the use of the data line is defined by scanning the definition of Figure:

8) data conversion tools: free for Caji information and data conversion between the demolition.
We looked at the file size to convert it to meet specifications, or by the conversion of documents is not available, here need to use tools of information-UE

Line editing, right-click conversion needs of the information, choose to edit it UE Figure Open map shows the following
Click Ctrl + G Shortcuts on the positioning information Figure
Here input address, which is 8 M 0 x007fffff character at the end of the address, if the font is 16 M, at the end of the address: 0 x00ffffff, we are
8 M in a font for example, enter the address and then click OK, you jump directly to the address of the location, the figure
Hold down the mouse over 0 x007fffff cling to choose the addresses of all the data, if the font is 16 M, on the choice of more than 0 x00ffffff address by paragraph
There are data Figure
Choose to delete redundant data click Ctrl + X will swap its shear, the figure is sheared address, the address at the end of 0 x007fffff
Then click the file and choose Close can be preserved, will be preserved generate a backup paper Figure


Bin choose to Bif button, and click source files, transferred to edit documents on good character open, and then click the target file, choose to convert the post to preserve the path of converting the input file name, then click open, such as Graphic:
£؛
At this point, click the button to begin converting paper conversion, after the success of conversion will prompt the following frame can be set point, in Figure:£؛